The structural behaviour of architectural fabric structures
Contents |
[edit] Introduction
Fabric structures are a form of tensile structure in which a membrane is 'stretched' to form a structurally stable surface. Typically, the membrane is formed by a fabric, consisting of a woven base cloth, coated on both sides with an impermeable polymer, and sometimes a durable topcoat, held in position by tension forces imposed by a structural framework, a cabling system, internal air pressure or a combination.
[edit] Architectural fabrics.
Typically, fabric structures are formed using PTFE coated glass, or PVC coated polyester, although there is an increasingly wide range of other materials available. For more information see: The development of structural membranes.
The fabric itself it generally very thin, approximately 1mm thick. It has very little compressive strength, but very high tensile strength. Woven glass fabrics are stronger in tension than steel. Different types of membrane are available depending on the use, longevity and tensile strength required.
Typical tensile strengths are set out below:
- Type 1: 3,000 N/5cm
- Type 2: 4,000 N/5cm
- Type 3: 5,550 N/5cm
- Type 4: 7,000 N/5cm
- Type 5: 9,000 N/5cm
Individual pieces of fabric may be welded, heat sealed, glued or sewn together to form larger panels. Steel cables may be attached to the perimeter of the panels, to pull them into their desired positions.
[edit] Structural form
Fabric structures are generally tensioned and given their structural stability by their doubly-curved shape, which may be anticlastic or synclastic.
[edit] Anticlastic
An anticlastic surface (or a saddle shape), is a surface in which the two axes of the surface curve in opposite directions, that is, the centres of curvature are located on opposite sides of the surface. A hyperbolic paraboloid is an example of an anticlastic surface.
Anticlastic shapes tend to be formed by steel cables and masts or arches pulling them into tension. Whilst the fabric itself may be very thin, the tensile force imposed on it to ensure it remains stable under load can be high, and so the supporting structure required to transfer loads to the foundations can be significant.
[edit] Synclastic
A synclastic surface (or a dome shape), is a surface in which the two axes of the surface curve in the same direction, that is the centres or curvature are on the same side of the surface.
Synclastic surfaces are typically created by inflation (sometimes referred to as air-supported structures). Air pressure within the enclosure maintains the form of the surface when it is tensioned. The is similar to blowing up a balloon, but the pressure is very low so that it is generally not noticeable to occupants.
[edit] The effect of curvature
Doubly-curved surfaces can be tensioned without distorting their form, as the opposing curvatures balance each other at every point on the surface. Tensioning the fabric reduces its elasticity so that it will distort less when subsequently loaded, such as under wind load or snow load.
In addition, the geometry of the curvature itself means that any extension of the fabric under load results in a relatively smaller deflection than would be apparent in a flatter, or less curved fabric.
So the greater the curvature and the greater the pre-tensioning of the fabric, the less it will distort under load.
[edit] Structural design
A range of techniques can be used to design and analyse the stressed skin of fabric structures and to determine the optimum structural shape.
This process was initially carried out using relatively simple mathematical techniques and model making using wire frames and soap films to determine optimum forms, sometimes described as ‘minimal surfaces’.
It is only relatively recently that it has been possible to model the non-linear, dynamic behaviour of architectural fabrics (in which a change in one part affects all other parts and vice versa) using specialist form-finding software. This allows designers to vary the elements, boundary conditions and geometry of the design and rapidly determine the most efficient structural solution.
This software can also be used to generate patterns for automatically cutting the fabric panels to create the form required.
[edit] Related articles on Designing Buildings Wiki
- Anticlastic.
- Architectural fabrics.
- Carbon fibre.
- ETFE.
- Fabric structures.
- Polyvinyl chloride PVC.
- Principles of enclosure.
- PTFE.
- Structural principles.
- Tensile structures.
- Thermal behaviour of architectural fabric structures.
- The history of fabric structures.
- The development of structural membranes.
- The thermal behaviour of spaces enclosed by fabric membranes.
Featured articles and news
Quality Planning for Micro and Small to Medium Sized Enterprises
A CIOB Academy Technical Information sheet.
A briefing on fall protection systems for designers
A legal requirement and an ethical must.
CIOB Ireland launches manifesto for 2024 General Election
A vision for a sustainable, high-quality built environment that benefits all members of society.
Local leaders gain new powers to support local high streets
High Street Rental Auctions to be introduced from December.
Infrastructure sector posts second gain for October
With a boost for housebuilder and commercial developer contract awards.
Sustainable construction design teams survey
Shaping the Future of Sustainable Design: Your Voice Matters.
COP29; impacts of construction and updates
Amid criticism, open letters and calls for reform.
The properties of conservation rooflights
Things to consider when choosing the right product.
Adapting to meet changing needs.
London Build: A festival of construction
Co-located with the London Build Fire & Security Expo.
Tasked with locating groups of 10,000 homes with opportunity.
Delivering radical reform in the UK energy market
What are the benefits, barriers and underlying principles.
Information Management Initiative IMI
Building sector-transforming capabilities in emerging technologies.
Recent study of UK households reveals chilling home truths
Poor insulation, EPC knowledge and lack of understanding as to what retrofit might offer.
Embodied Carbon in the Built Environment
Overview, regulations, detail calculations and much more.
Why the construction sector must embrace workplace mental health support
Let’s talk; more importantly now, than ever.
Ensuring the trustworthiness of AI systems
A key growth area, including impacts for construction.